Code: SC457
Description: Image transfer belt cleaning unit position error - Timing & Condition • The belt cleaning home position sensor does not detect the transfer belt cleaning unit moving into the contact position or the release position at the correct time.
Causes: • Dirty sensor • Defective sensor • Defective belt cleaning clutch • Defective I/O control board • Defective main control board
Remedy: 1. Pull out and re-insert the image transfer belt unit. 2. Clean the belt cleaning H.P. sensor if it is dirty. 3. Replace the sensor. (Input Check: 5-803-12) 4. Replace the belt cleaning clutch. (Output Check: SP 5- 804-36) 5. Replace the I/O control board. 6. Replace the main control board. - Signals to Check - • H.P.: CN202-2 or TP254 on I/O control board