Code: SC385
Description: ID sensor VSG adjustment error - Timing - During process control self check, the main control board detects an out-ofrange VSG signal from the ID sensor.
Causes: • Dirty ID sensor • Poor connection • Defective ID sensor • Poor cleaning of the OPC drum
Remedy: 1. Clean the ID sensor. 2. Make sure the sensor is properly connected. 3. Replace the ID sensor. 4. Check the drum cleaning unit. [Signal Check] • ID sensor LED: CN216-B7 or TP103 on I/O control board • ID sensor 1 (K ): CN216-B8 or TP188 on I/O control board / TP115 on main control board. • ID sensor 2 (CMY): CN216-B9 or TP187 on the I/O control board / TP114 on the main control board.