Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC400 — Ricoh B023 Aficio Color 6513 Cattleya 2

Code: SC400

Description: Image transfer belt bias error - Timing - While the image transfer belt bias is ON - Condition - The feedback voltage is 4.8V or higher, or PWM value is 50% or higher for 500ms continuously.
Causes: • Poor connections • Defective high voltage supply board (T1/PCC/BR) • Defective I/O control board • Defective main control board
Remedy: 1. Make sure the high voltage cable and trigger lines are properly connected to the high voltage supply board, I/O control board, and main control board. 2. Replace the high voltage supply board (T1/PCC/BR). 3. Replace the I/O control board. 4. Replace the main control board. [Signal Check] • Feedback signal: CN209-9, TP264, or CN211-A4 on I/O control board / CN302- A6 or TP106 on main control board. • PWM: CN209-10 or TP272 on the I/O control board.

← Xem tất cả mã lỗi Ricoh B023 Aficio Color 6513 Cattleya 2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie