Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi SC500 — Ricoh B023 Aficio Color 6513 Cattleya 2

Code: SC500

Description: Fusing motor error - Timing & Condition - • The feedback signal from the motor is still out of range 1 second after the trigger signal was sent. • The feedback signal goes out of range for 2 seconds while the trigger signal is ON.
Causes: • Poor connections • Defective fusing motor • Defective I/O control board • Defective main control board
Remedy: 1. Make sure that connector CN218 is properly connected to the I/O control board. 2. Replace the fusing motor. (Output check: SP 5-804-005) 3. Replace the I/O control board. 4. Replace the main control board. 5. Check for anything that might overload the fusing unit drive. [Signal Check] • Motor OK: CN218-7 or TP104 on the I/O control board

← Xem tất cả mã lỗi Ricoh B023 Aficio Color 6513 Cattleya 2

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie