Description: Sorter: Bin motor error - Timing & Condition - The signal from the wheel sensor does not change as expected. When this error is detected twice, this SC code is displayed.
Causes: • Poor connections • Defective sensor • Defective motor • Bin position error • Defective main board
Remedy: 1. Make sure the wheel H.P. sensor and bin motor are properly connected. 2. Replace the wheel sensor (Input check: SP5-803-124/125). 3. See if the bins are properly positioned. 4. Replace the bin motor (Output check: SP5-804-124). 5. Replace the main board.