Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6021 — Epson AcuLaser C1000

Code: 6021

Description: Transfer Belt Cleaner gap control error
Causes: 1. The belt cleaner pressure is detected along with the color print and special print pressure / estrangement operation. 2. When the belt cleaner estrangement sensor (PC16) does not change within the specified period after the belt cleaner motor starts rotating, it is detected that the belt cleaner is abnormal.
Remedy: 1 During printing, does the belt cleaner motor rotate? (Check it by its sound.) Or remove the left cover, take a look from the front bottom and check it by the lever operation. No Remove connector PJ32A, PJ33A and insert it again. Remove connector PJ51, PJ61 and insert it again. 2 Does the sensor light shielding plate of the sensor shut the light off? No Replace the belt cleaner estrangement sensor. Others Replace PWB-A.

← Xem tất cả mã lỗi Epson AcuLaser C1000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie