Code: E547
Description: Feed Motor Failure
- DRIVE ASSY FEED (Feed Motor) of the Feeder is not rotating at the specified speed.
- DRIVE ASSY FEED (Feed Motor) of the Feeder is not rotating at the specified speed.
Causes: • HARNESS-ASSY FEED MAIN • DRIVE ASSY FEED • PWBA TRAY 500 • HARNESS-ASSY FEED 1 • HARNESS ASSY MAIN • PWBA MCU
Remedy: 1 Check of DRIVE ASSY FEED attachment Is DRIVE ASSY FEED attached correctly? Go to Step [2]. Re-attach, and go to step [2]. 2 Continuity check of HARNESS-ASSY FEED MAIN Disconnect P/J437 from PWBA TRAY CONT. Do all of the wiring below have normal continuity? J437-1 . J440-5 J437-2 . J440-4 J437-4 . J440-2 J437-5 . J440-1 Go to Step [3]. Replace HARNESSASSY FEED MAIN. 3 24 VDC power supply check to DRIVE ASSY FEED The voltage of P440-2 . P440-1 on PWBA FEED DRV is 24 VDC? Go to Step [4]. Go to Step [5]. 4 Check of FEED MOTOR START signal The voltage of P440-5 . P440-1 on PWBA FEED DRV is xx VDC when FEED MOTOR START signal is ON? Replace DRIVE ASSY FEED. Go to Step [10]. 5 24 VDC power supply check to PWBA TRAY 500 The voltage of P435-9/10 . P435-7/8 on PWBA TRAY 500 is 24 VDC? Replace PWBA TRAY 500. Go to Step [6]. 6 Continuity check of HARNESS-ASSY FEED 1 Disconnect P/J435 from PWBA TRAY CONT. Do all of the wiring below have normal continuity? J435-10 . P608-1 (connector on Feeder to be connected to the printer) J435-9 . P608-2 J435-8 . P608-3 J435-7 . P608-4 Go to Step [7]. Replace PWBA TRAY 500. 7 Continuity check of HARNESS ASSY MAIN Disconnect P/J421 from PWBA MCU. Do all of the wiring below have normal continuity? J421-1 . J608-10 (connector on the printer to connect Feeder) J421-2 . J608-9 J421-3 . J608-8 J421-4 . J608-7 Go to Step [8]. Repair broken or shorted part. 8 24 VDC power supply check to PWBA MCU The voltage of P410-5/6 . P410-7/8 on PWBA MCU is 24 VDC? Replace PWBA MCU. Go to Step [9]. 9 Continuity check of HARNESS ASSY MAIN Disconnect P/J410 from PWBA MCU and P/ J502 from LV/HVPS. Do all of the wiring below have normal continuity? J410-5 . J502-5 J410-6 . J502-6 J410-7 . J502-7 J410-8 . J502-8 Replace LV/ HVPS. Repair broken or shorted part.