Code: 100
Description: - Laser power has weakened.
- SOS signal cannot be detected.
- SOS signal cannot be detected.
Causes: • ROS ASSY • PWBA MCU
Remedy: 1 Check after turning the power OFF and ON. Does the error recur even when the power is turned off and back on again? Go to Step [2]. End of procedure 2 Check the connection of the ROS ASSY Check the connection state between ROS ASSY and PWBA MCU. Are P/J151 and P/J12 connected correctly? Go to Step [3]. Reconnect the P/J151 and P/J12 correctly. 3 Check after replacing the ROS ASSY Replace the ROS ASSY with a new one. Does the error still occur after the replacement? Replace the PWBA MCU. End of procedure