Code: 900
Description: NV-RAM in the PWBA MCU error
- Communication error between the PWBA MCU and the PWBA EEPROM, CRUM in the FUSER UNIT, CRUM in the TRANSFER UNIT, or the HVPS.
- Communication error between the PWBA MCU and the PWBA EEPROM, CRUM in the FUSER UNIT, CRUM in the TRANSFER UNIT, or the HVPS.
Causes: • PWBA MCU • PWBA EEPROM XPRO • FUSER UNIT • TRANSFER UNIT
Remedy: 1 Check after turning the power OFF and ON Does the error recur even when the power is turned off and back on again? Go to Step [2]. End of procedure 2 Check after reinstalling the PWBA MCU Remove the PWBA MCU, and reinstall it properly. Does the error still occur after the replacement? Replace the PWBA MCU. End of procedure