Code: 1010
Description: Verify error
Remedy: 1 Initial setting: • Remove all the optional units and modules related to the electrical system and bring the printer back to the standard status. • Check if all connectors are properly connected to the CONTROLLER PWB. • Reinsert the DIMM. Replace or reinstall the relevant part. Go to step 2. 2 Checking the DIMM: • After formatting the DIMM, load the control program to the DIMM. • Insert the DIMM in the socket P until it locks securely. NOTE: Since the DIMM has the right direction to insert, be sure to insert it in the correct direction. Replace or reinstall the relevant part. Problem solved.