Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 1700 — Epson AcuLaser C3000

Code: 1700

Description: Built-in network hardware error
Remedy: 1 Initial setting: • Remove all the optional units and modules related to the electrical system and bring the printer back to the standard status. • Check if all connectors are properly connected to the CONTROLLER PWB. Replace or reinstall the relevant part. Go to step 2. 2 Checking the network setting • Check if the existing network is operating normally. • Print the network status sheet to check if the every setting is correct. • Check if the network environment of the client side is correct. Problem solved. Go to step 3. 3 Replacing the relevant unit: Replacing the CONTROLLER PWB. Replace or reinstall the relevant part. Problem solved.

← Xem tất cả mã lỗi Epson AcuLaser C3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie