Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 900 — Epson AcuLaser C3800

Code: 900

Description: NV-RAM in the PWBA MCU error
- Communication error between the PWBA MCU and the PWBA EEPROM, CRUM in the FUSER UNIT, CRUM in the TRANSFER UNIT, or the HVPS.
Causes: • PWBA MCU • PWBA EEPROM XPRO • FUSER UNIT • TRANSFER UNIT
Remedy: 1 Check after turning the power OFF and ON Does the error recur even when the power is turned off and back on again? Go to Step [2]. End of procedure 2 Check after reinstalling the PWBA MCU Remove the PWBA MCU, and reinstall it properly. Does the error still occur after the replacement? Replace the PWBA MCU. End of procedure

← Xem tất cả mã lỗi Epson AcuLaser C3800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie