Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 103 — Epson AcuLaser C4200

Code: 103

Description: The HOLDER ASSY CTD power has weakened.
Remedy: 1 Initial Check Are the parts listed below installed incorrectly? HOLDER ASSY CTD Reinstall the part(s) correctly. Go to Step [2]. 2 Continuity Check of the HARNESS ASSY FSR/ADC 1. Disconnect P/J136 connector on the HOLDER ASSY CTD, and P/J36 connector on the PWBA MCU IDTN. 2. Check the continuity of J136<=>J36. Is there normal continuity between them? Go to Step [3]. Replace the HARNESS ASSY FSR/ADC. 3 Check of the HOLDER ASSY CTD Replace the HOLDER ASSY CTD with a new one. Does the error still occur after the replacement? Replace the PWBA MCU IDTN. End of procedure

← Xem tất cả mã lỗi Epson AcuLaser C4200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie