Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 531 — Epson AcuLaser C7000

Code: 531

Description: PR Motor malfunction
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: P/R MOT&DRV ASSY, TRANSFER HIGH ASSY TR0 SENSOR, MCU PWB Replace or reinstall the relevant part. Go to step 2 2 • Checking whether the problem lies in engine or controller: Can a test print (single sheet / consecutive printing, about 10 sheets each) be performed normally with the engine alone? Check the Printer Controller. (If an error still occurs after replacing, go to step 3.)] Go to step 3 3 • Checking the Process Motor operation: When the test print is conducted, does the Process Motor operate? Go to step 9 Go to step 4 4 • Checking the P/R MOT&DRV ASSY for foreign matters: Is the operation of the PROCESS DRIVE ASSY blocked by foreign matters? Remove the foreign matters. • With the tool: Go to step 5 • Without the tool: Go to step 6 5 • Checking the P/R MOT&DRV ASSY Does the P/R MOT&DRV ASSY function properly? . By using the diagnostics commander, check by Digital Output Test device code "72". Replace the MCU PWB-XL Go to FIP-2.28 “Faulty P/R MOT & DRV ASSY” 6 • Checking the installation of P/R MOT&DRV ASSY: Has the P/R MOT&DRV ASSY been installed properly? Go to step 7 Reinstall the P/R MOT & DRV ASSY 7 • Checking the installation of TRANSFER HIGH ASSY: Has the TRANSFER HIGH ASSY been installed properly? Go to step 8 Reinstall the TRANSFER HIGH ASSY 8 • Checking the P/R MOT&DRV ASSY Does the output shaft of the P/R MOT&DRV ASSY turn smoothly when the rotor of the P/R MOT&DRV ASSY is turned by hand? Go to step 9 Replace the P/R MOT & DRV ASSY 9 • Checking the installation of TR0 SENSOR: Has the TR0 SENSOR been installed properly? • With the tool: Go to step 8 • Without the tool: Go to FIP-2.21 “Faulty TR0 SENSOR” Reinstall the TR0 SENSOR 10 • Checking the TR0 SENSOR Does the TR0 SENSOR function properly? . By using the diagnostics commander, check by Digital Input Test device code "42". Replace the MCU PWB-XL Go to FIP-2.21 “Faulty TR0 SENSOR”

← Xem tất cả mã lỗi Epson AcuLaser C7000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie