Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 543 — Epson AcuLaser C7000

Code: 543

Description: Rear fan malfunction
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: DEVE. FAN, MCU PWB Replace or reinstall the relevant part. Go to step 2 2 • Checking whether the problem lies in engine or controller: Can a test print (single sheet / consecutive printing, about 10 sheets each) be performed normally with the engine alone? Check the Printer Controller. If an error still occurs after replacing, • With the tool: Go to step 3 • Without the tool: Go to step 4 • With the tool: Go to step 3 • Without the tool: Go to step 4 3 • Checking the DEVE. FAN: Does the DEVE. FAN function properly? . By using the diagnostics commander, check by Digital Output Test device code "60". Replace the MCU PWB-XL Go to step 4 4 • Checking the installation of DEVE. FAN: Has the DEVE. FAN been installed properly? Go to step 5 Reinstall the DEVE. FAN 5 • Checking the Main Harness: Is there breakage or faulty contact in the harness between the MCU PWB and the DEVE. FAN? Replace the MCU PWB-XL or DEVE. FAN Replace the DEVE. FAN

← Xem tất cả mã lỗi Epson AcuLaser C7000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie