Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 545 — Epson AcuLaser C7000

Code: 545

Description: Fuser Unit fan 1 malfunction
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: FUSER FAN-1, MCU PWB Replace or reinstall the relevant part. Go to step 2 2 • Checking whether the problem lies in engine or controller: Can a test print (single sheet / consecutive printing, about 10 sheets each) be performed normally with the engine alone? Check the Printer Controller. If an error still occurs after replacing, • With the tool: Go to step 3 • Without the tool: Go to step 4 • With the tool: Go to step 3 • Without the tool: Go to step 4 3 • Checking the FUSER FAN-1: Does the FUSER FAN-1 function properly? . By using the diagnostics commander, check by Digital Output Test device code "63". Replace the MCU PWB-XL Go to step 4 4 • Checking the installation of FUSER FAN-1: Has the FUSER FAN-1 been installed properly? Go to step 5 Reinstall the FUSER FAN-1 5 • Checking the Main Harness: Is there breakage or faulty contact in the harness between the MCU PWB and the FUSER FAN-1? Replace the MCU PWB-XL or FUSER FAN-1 Replace the FUSER FAN-1

← Xem tất cả mã lỗi Epson AcuLaser C7000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie