Code: 520
Description: 2nd BTR malfunction (Advance)
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: BTR CAM CLUTCH, PRO DRIVE GEAR ASSY BTR WHEEL SENSOR, MCU PWB Replace or reinstall the relevant part. Go to step 2 2 • Checking whether the problem lies in engine or controller: Can a test print (single sheet / consecutive printing, about 10 sheets each) be performed normally with the engine alone? Check the Printer Controller. If an error still occurs after replacing, • With the tool: Go to step 3 • Without the tool: Go to step 4 • With the tool: Go to step 3 • Without the tool: Go to step 4 3 • Checking the PRO Motor: Does the PRO Motor function properly? . By using the diagnostics commander, check by Digital Output Test device code "54". Go to step 5 Go to step 4 4 • Checking the installation of PRO DRIVE GEAR ASSY: Has the PRO DRIVE GEAR ASSY been installed properly? • With the tool: Go to step 5 • Without the tool: Go to step 6 Reinstall the PRO DRIVE GEAR ASSY 5 • Checking the P/R MOT&DRV ASSY: Does the P/R MOT&DRV ASSY function properly? . By using the diagnostics commander, check by Digital Output Test device code "54". Go to step 8 Go to FIP-2.28 “Faulty P/R MOT & DRV ASSY” 6 • Checking the installation of 2ND BTR ASSY: Has the 2ND BTR ASSY been installed properly? Go to step 7 Reinstall the 2ND BTR ASSY 7 • Checking the installation of BTR WHEEL SENSOR: Has the BTR WHEEL SENSOR been installed properly? Go to FIP-2.22 “Faulty BTR CAM CLUTCH” Reinstall the BTR WHEEL SENSOR 8 • Checking the BTR WHEEL SENSOR: Does the BTR WHEEL SENSOR function properly? . By using the diagnostics commander, check by Digital Input Test device code "76". Replace the MCU PWB-XL Replace the BTR WHEEL SENSOR 9 • Checking the BTR CAM CLUTCH: Does the BTR CAM CLUTCH function correctly? . By using the diagnostics commander, check by Digital Output Test device code "70". Replace the MCU PWB-XL Go to FIP-2.22 “Faulty BTR CAM CLUTCH”