Code: 526
Description: ADC sensor soiled
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: ADC SENSOR ASSY, MAIN HARNESS ASSY MCU PWB Replace or reinstall the relevant part. Go to step 2 2 • Checking whether the problem lies in engine or controller: Can a test print (single sheet / consecutive printing, about 10 sheets each) be performed normally with the engine alone? Check the Printer Controller. (If an error still occurs after replacing, go to step 3.)] Go to step 3 3 • Checking the ADC Sensor surface: Is there dirt or any foreign matter adhering to the surface of the ADC Sensor? Remove dirt/foreign matters. • With the tool: Go to step 4 • Without the tool: Go to step 6 4 • Checking the ADC Sensor: Does the ADC Sensor function properly? . By using the diagnostics commander, check by Digital Output Test device code "72". Go to step 5 Go to FIP-2.16 “Faulty ADC Sensor” 5 • Checking the ADC Solenoid: Does the ADC Solenoid function properly? . By using the diagnostics commander, check by Digital Output Test device code "67". Go to step 7 Go to FIP-2.17 “Faulty ADC Solenoid” 6 • Checking the installation of ADC SENSOR ASSY: Has the ADC SENSOR ASSY been installed properly? Go to step 7 Reinstall the ADC SENSOR ASSY 7 • Replacing the MCU PWB and Performing Checks: Replace the MCU PWB. Is the problem solved? Problem solved Go to FIP-2.32 “Faulty LV/HV POWER SUPPLY”