Code: 530
Description: Environment (humidity)sensor malfunction
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: ENVIRONMENT SENSOR, P/H HARNESS ASSY, MCU PWB Replace or reinstall the relevant part. • With the tool: Go to step 2 or 3 • Without the tool: Go to step 4 or 5 2 • Checking the TEMP SENSOR: Does the TEMP SENSOR function properly? . By using the diagnostics commander, check by Analog Input Test device code "04". Go to step 6 Replace the ENVIRONMENT SENSOR 3 • Checking the Humidity SENSOR: Does the Humidity SENSOR function properly? . By using the diagnostics commander, check by Analog Input Test device code "06". Go to step 6 Replace the ENVIRONMENT SENSOR 4 • Checking the thermistor resistance of ENVIRONMENT SENSOR: Is the resistance between P/J105-1PIN . P/J105- 4PIN approx. 5 kO at room temperature (18~20°C)? Go to step 5 Replace the ENVIRONMENT SENSOR 5 • Checking the voltage of ENVIRONMENT SENSOR: Is the voltage between P/J23-5PIN . P/J23-4PIN on the MCU PWB in the range of about 0.1-4.0 VDC? Replace the MCU PWB-XL Replace the ENVIRONMENT SENSOR 6 • Checking for continuity of P/H HARNESS ASSY: Is there normal continuity between J23 . J105? Replace the MCU PWB-XL Replace the P/H HARNESS ASSY