Code: 532
Description: P/H Motor2 malfunction
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: P/H MOTOR ASSY, FEED ROLL ASSY, MAIN P/H FRAME ASSY, WASTE TONER BOX, MCU PWB Replace or reinstall the relevant part. Go to step 2 2 • Checking whether the problem lies in engine or controller: Can a test print (single sheet / consecutive printing, about 10 sheets each) be performed normally with the engine alone? Check the Printer Controller. (If an error still occurs after replacing, go to step 3.) Go to step 3 3 • Checking the P/H Motor operation: When the test print is conducted, does the P/H Motor slightly operate and stop? Go to step 5 Go to step 4 4 • Checking the P/H Motor operation: When the test print is conducted, does the P/H Motor remain in stoppage? Go to FIP-2.29 “Faulty P/H MOTOR ASSY” Go to step 5 5 • Checking drive transmission: Does the rotor of the P/H MOTOR ASSY turn smoothly? • Check by turning the rotor of the P/H MOTOR ASSY counterclockwise with your hand. Go to step 6 Replace the faulty part(s). 6 • Checking the MAIN P/H FRAME ASSY: Does the MAIN P/H FRAME ASSY operate smoothly? Go to step 7 Replace the faulty part(s). 7 • Checking the WASTE TONER BOX: Does the rotor of the P/H MOTOR ASSY turn smoothly when the WASTE TONER BOX is removed? • Check by turning the rotor of the P/H MOTOR ASSY counterclockwise with your hand. Go to step 8 Replace the WASTE TONER BOX 8 • Checking the FEED ROLL ASSY: Does the FEED ROLL ASSY turn smoothly? • Depress the FEED SOLENOID armature and engage the gears and then check by turning the rotor of the P/H MOTOR ASSY counterclockwise with your hand. Go to FIP-2.29 “Faulty P/H MOTOR ASSY” Replace the faulty part(s).