Code: 543
Description: Rear fan malfunction
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: DEVE. FAN, MCU PWB Replace or reinstall the relevant part. Go to step 2 2 • Checking whether the problem lies in engine or controller: Can a test print (single sheet / consecutive printing, about 10 sheets each) be performed normally with the engine alone? Check the Printer Controller. If an error still occurs after replacing, • With the tool: Go to step 3 • Without the tool: Go to step 4 • With the tool: Go to step 3 • Without the tool: Go to step 4 3 • Checking the DEVE. FAN: Does the DEVE. FAN function properly? . By using the diagnostics commander, check by Digital Output Test device code "60". Replace the MCU PWB-XL Go to step 4 4 • Checking the installation of DEVE. FAN: Has the DEVE. FAN been installed properly? Go to step 5 Reinstall the DEVE. FAN 5 • Checking the Main Harness: Is there breakage or faulty contact in the harness between the MCU PWB and the DEVE. FAN? Replace the MCU PWB-XL or DEVE. FAN Replace the DEVE. FAN