Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 524 — Epson AcuLaser C8600

Code: 524

Description: Toner density malfunction (Low density)
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: DISPENSE MOTOR ASSY, DEVE. CONTACT PLATE ASSY Developer Assy, MAIN HARNESS ASSY, MCU PWB Replace or reinstall the relevant part. Go to step 2 2 • Checking whether the problem lies in engine or controller: Can a test print (single sheet / consecutive printing, about 10 sheets each) be performed normally with the engine alone? Check the Printer Controller. (If an error still occurs after replacing, go to step 3.)] Go to step 3 3 • Checking the Drum surface image: Are the various toner images developed properly on the Drum surface? • Turn the power OFF while you think there is an image being transferred in the course of printing, and visually inspect Cin50% patch on the Drum surface. Go to step 8 Go to step 4 4 • Checking the Drum surface picture image: Are all the colors of the various toner images on the Drum surface thin? • Turn the power OFF while you think there is an image being transferred in the course of printing, and visually inspect Cin50% patch on the Drum surface. Go to step 5 Go to step 11 5 • Checking the installation of Dispense Motor: Has the Dispense Motor been installed properly? • With the tool: Go to step 6 • Without the tool: Go to FIP-2.31 “Faulty the DISPENSE MOTOR ASSY” • If problem is not solved, go to step 7 Reinstall the DISPENSE MOTOR ASSY 6 • Checking the Dispense Motor: Does the Dispense Motor function properly? . By using the diagnostics commander, check by Digital Output Test device code "56". Go to step 7 Go to FIP-2.31 “Faulty the DISPENSE MOTOR ASSY” 7 • Checking the DEVE. CONTACT PLATE ASSY: Is the contact surface of the DEVE. CONTACT ASSY distorted? Or are there foreign matters on the contact surface of the DEVE. CONTACT ASSY? Replace the DEVE. CONTACT ASSY Go to step 8 8 • Checking the ADC Sensor surface: Is there dirt or any foreign matter adhering to the surface of the ADC Sensor? Remove dirt/ foreign matters. • With the tool: Go to step 9 • Without the tool: Go to FIP-2.16 “Faulty ADC Sensor” , FIP-2.17 “Faulty ADC Solenoid” 9 • Checking the ADC Sensor: Does the ADC Sensor function properly? . By using the diagnostics commander, check by Digital Output Test device code "72". Go to step 11 Go to FIP-2.16 “Faulty ADC Sensor” 10 • Checking the ADC Solenoid: Does the ADC Solenoid function properly? . By using the diagnostics commander, check by Digital Output Test device code "67". Go to step 11 Go to FIP-2.17 “Faulty ADC Solenoid” 11 • Replacing the Developer Assy and Performing Checks: Replace the Developer Assy with a new one for the color concerned. Does the problem still occur? Replace the MCU PWB-XL Problem solved

← Xem tất cả mã lỗi Epson AcuLaser C8600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie