Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 526 — Epson AcuLaser C8600

Code: 526

Description: ADC sensor soiled
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: ADC SENSOR ASSY, MAIN HARNESS ASSY MCU PWB Replace or reinstall the relevant part. Go to step 2 2 • Checking whether the problem lies in engine or controller: Can a test print (single sheet / consecutive printing, about 10 sheets each) be performed normally with the engine alone? Check the Printer Controller. (If an error still occurs after replacing, go to step 3.)] Go to step 3 3 • Checking the ADC Sensor surface: Is there dirt or any foreign matter adhering to the surface of the ADC Sensor? Remove dirt/foreign matters. • With the tool: Go to step 4 • Without the tool: Go to step 6 4 • Checking the ADC Sensor: Does the ADC Sensor function properly? . By using the diagnostics commander, check by Digital Output Test device code "72". Go to step 5 Go to FIP-2.16 “Faulty ADC Sensor” 5 • Checking the ADC Solenoid: Does the ADC Solenoid function properly? . By using the diagnostics commander, check by Digital Output Test device code "67". Go to step 7 Go to FIP-2.17 “Faulty ADC Solenoid” 6 • Checking the installation of ADC SENSOR ASSY: Has the ADC SENSOR ASSY been installed properly? Go to step 7 Reinstall the ADC SENSOR ASSY 7 • Replacing the MCU PWB and Performing Checks: Replace the MCU PWB. Is the problem solved? Problem solved Go to FIP-2.32 “Faulty LV/HV POWER SUPPLY”

← Xem tất cả mã lỗi Epson AcuLaser C8600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie