Code: 545
Description: Fuser Unit fan 1 malfunction
Remedy: 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: FUSER FAN-1, MCU PWB Replace or reinstall the relevant part. Go to step 2 2 • Checking whether the problem lies in engine or controller: Can a test print (single sheet / consecutive printing, about 10 sheets each) be performed normally with the engine alone? Check the Printer Controller. If an error still occurs after replacing, • With the tool: Go to step 3 • Without the tool: Go to step 4 • With the tool: Go to step 3 • Without the tool: Go to step 4 3 • Checking the FUSER FAN-1: Does the FUSER FAN-1 function properly? . By using the diagnostics commander, check by Digital Output Test device code "63". Replace the MCU PWB-XL Go to step 4 4 • Checking the installation of FUSER FAN-1: Has the FUSER FAN-1 been installed properly? Go to step 5 Reinstall the FUSER FAN-1 5 • Checking the Main Harness: Is there breakage or faulty contact in the harness between the MCU PWB and the FUSER FAN-1? Replace the MCU PWB-XL or FUSER FAN-1 Replace the FUSER FAN-1