Code: E010
Description: Process Motor YMC error • When the printer is not put in a ready status if the predetermined time has elapsed at motor-on. • When the printer is put out of the ready status continuously for the predetermined time during motor rotation.
Causes: • PU Drive Motor Y/M/C (M4) • PU Drive Motor Bk (M5) • Control Board (PWB-A)
Remedy: 1 Check the motor connector connection status, and correct if it is improper. 2 Check the motor drive coupling status, and correct if it is improper. 3 Check the operation of M4. p115 PWB-A CNPM-A-5A(REM) 9-C 4 Replace the PWB-A.