Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E300 — Epson AcuLaser C9000

Code: E300

Description: Polygon Motor error • When the spindle alarm signal (SPALM) is not cleared the predetermined time after the Polygon Motor has started. • When the spindle alarm signal is detected for longer than the predetermined time during steady rotation of the Polygon Motor.
Causes: • P/H Assy • Flat Cable • Control Board (PWB-A)
Remedy: 1 Check the cable connection status, and correct if it is improper. 2 Replace the P/H Assy. 3 Replace the PWB-A.

← Xem tất cả mã lỗi Epson AcuLaser C9000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie