Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E050 — Epson AcuLaser C9100

Code: E050

Description: ROS error
- The ROS Motor speed did not reach the normal speed continuously for 15 seconds during Warm Up or for 2 seconds during Run.
Causes: • HARNESS ASSY ROS • MCU PWB • ROS ASSY
Remedy: 1 Continuity check of HARNESS ASSY ANTENNA 1. Disconnect the P/J12 of the MCU PWB. 2. Disconnect the P/J120 of the ROS ASSY. 3. Check if the following wiring have continuity. J12-3 . J120-12 J12-4 . J120-11 J12-5 . J120-10 Do all of the wiring have continuity? To Step 2 Replace the HARNESS ASSY ROS 2 Power supply check of ROS Motor Check the voltage between the P/J12- 1 and P/J12-2 of the MCU PWB. Is the voltage between P/J12-1 and P/ J12-2 24 VDC? To Step 3 Replace the MCU PWB 3 Check of ROS ASSY 1. Replace the ROS ASSY. 2. Turn the main power on. Does the error occur? Replace the MCU PWB Problem solved

← Xem tất cả mã lỗi Epson AcuLaser C9100

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie