Code: E086
Description: ADC sensor error
- Wire breakage or fault of ADC Sensor
- Wire breakage or fault of ADC Sensor
Causes: • HARNESS ASSY REGI • SENSOR ASSY MOB ADC • HARNESS ASSY R-BTM • MCU PWB
Remedy: 1 Check of IDT2 Check if paper stick to and coil around the IDT2. Is there any paper that is sticking to and coiling around it? Remove the paper with attention to avoid any damage to the IDT2. To Step 2 2 Check of SENSOR ASSY MOB ADC Check the SENSOR ASSY MOB ADC for any foreign matter and check if jammed paper cover and interfere the sensor operation. Is it normal? To Step 3 Remove the foreign matter or jammed paper. 3 Continuity check of HARNESS ASSY REGI 1. Disconnect the relay connector P/ J271 of the HARNESS ASSY REGI. 2. Disconnect the relay connector P272 of the SENSOR ASSY MOB ADC. 3. Check if the following wiring have continuity. P272-16 . J271-1 P272-15 . J271-2 P272-14 . J271-3 P272-13 . J271-4 P272-12 . J271-5 P272-11 . J271-6 P272-10 . J271-7 P272-9 . J271-8 Do all of the wiring have continuity? To Step 2 Replace the HARNESS ASSY REGI 4 Continuity check of HARNESS ASSY R-BTM 1. Remove the P/J27 of the MCU PWB. 2. Disconnect the relay connector P/ J271 of the HARNESS ASSY RBTM. 3. Check if the following wiring have continuity. J27-8 . P271-9 J27-7 . P271-10 J27-6 . P271-11 J27-5 . P271-12 J27-4 . P271-13 J27-3 . P271-14 J27-2 . P271-15 J27-1 . P271-16 Do all of the wiring have continuity? To Step 3 Replace the HARNESS ASSY R-BTM 5 Check of SENSOR ASSY MOB ADC 1. Replace the SENSOR ASSY MOB ADC. 2. Turn the main power on. Does the error occur? Replace the MCU PWB Problem solved