Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E640 — Epson AcuLaser C9200N

Code: E640

Description: Color Shift Test Pattern failure
- The number of points detected in the main scan direction is more or less than the specified value during main scan direction registration correction.
- The number of points detected in the sub scan direction is more or less than the specified value during sub scan direction registration correction.
Causes: • Transfer Belt Unit • IDC Sensor • Photoconductor Unit • PH Unit
Remedy: 1 Check if Transfer Belt has damages and correct as necessary. - - 2 Check that the IDC Sensor is properly installed and correct as necessary. - - 3 Check if the IDC sensor is dirty and correct as necessary. - - 4 Check the IDC Sensor connector for proper connection and correct as necessary. - - 5 Check the PWB-M connector for proper connection and correct as necessary. - - 6 Change the cable that connects IDC Sensor and PWB-M. 7 Change IDC Sensor. 8 Change Photoconductor Unit. 9 Change PH Unit.

← Xem tất cả mã lỗi Epson AcuLaser C9200N

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie