Code: E520
Description: BTR 2 Advance Error
- The 2nd BTR Retract Sensor does not turn ON within the specified time.
- The 2nd BTR Retract Sensor does not turn ON within the specified time.
Causes: • HARNESS ASSY MAIN • MOT ASSY MICRO • SENSOR 2BTR RETRACT • HARNESS ASSY ADC • PWBA MCU • LV/HVPS
Remedy: 1 Check of DRIVE ASSY BTR attachment Is the DRIVE ASSY BTR attached correctly? Go to Step [2]. Re-attach, and go to step [2]. 2 Check of 2ND BTR ASSY attachment Is 2ND BTR ASSY attached correctly? Go to Step [4]. Re-attach, and go to step [3]. 3 Does the error recur when a test print is made? Go to Step [4]. End of procedure 4 Continuity check of HARNESS ASSY MAIN Disconnect the P/J403 from PWBA MCU. Do all of the wiring below have normal continuity? J403-1 . J600-3 J403-2 . J600-2 J403-3 . J600-1 Go to Step [5]. Repair broken or shorted part. 5 24 VDC power supply check to MOT ASSY MICRO (2nd BTR Retract Motor) The voltage of P403-3 . P403-2 on PWBA MCU is 24 VDC? Go to Step [6]. Go to Step [11]. 6 Check after replacement of MOT ASSY MICRO Replace MOT ASSY MICRO. Does the error recur when a test print is made? Go to Step [7]. End of procedure 7 5 VDC power supply check to SENSOR 2BTR RETRACT The voltage of P418-4 . P418-5 on PWBA MCU is 5 VDC? Go to Step [8]. Go to Step [11]. 8 Continuity check of HARNESS ASSY ADC Disconnect the P/J418 from PWBA MCU. Do all of the wiring below have normal continuity? J418-4 . J112-3 J418-5 . J112-2 J418-6 . J112-1 Go to Step [9]. Replace HARNESS ASSY ADC. 9 Check after replacement of SENSOR 2BTR RETRACT Replace SENSOR 2BTR RETRACT. Does the error recur when a test print is made? Go to Step [10]. End of procedure 10 Check after replacement of PWBA MCU Replace PWBA MCU. Does the error recur when a test print is made? Go to Step [12]. End of procedure