Code: E530
Description: Humidity Sensor Error
- When the Input from SENSOR HUM & TEMP is out of specification.
- When the Input from SENSOR HUM & TEMP is out of specification.
Causes: • HARNESS ASSY MAIN • SENSOR HUM & TEMP
Remedy: 1 Continuity check of HARNESS ASSY MAIN Disconnect P/J413 from PWBA MCU. Is the continuity normal between all terminals of J413 . J104? Go to Step [2]. Repair broken or shorted part. 2 Check after replacement of SENSOR HUM & TEMP Replace SENSOR HUM & TEMP. Does the error recur when the power is turned ON? Replace PWBA MCU. End of procedure