Code: 0018
Description: K developing motor malfunction
The K developing motor does not rotate evenly even after the lapse of a given period of time while it is being started.
- The motor lock signal remains HIGH for a given period of consecutive time while the K developing motor is being rotated.
The K developing motor does not rotate evenly even after the lapse of a given period of time while it is being started.
- The motor lock signal remains HIGH for a given period of consecutive time while the K developing motor is being rotated.
Causes: K developing motor (M5) Print control board (PRCB) DC power supply (DCPU)
Remedy: 1 Check the M5 connector for proper connection and correct as necessary. 2 Check M5 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M5 operation check PRCB PJ8-8 to 14 L-5 5 Change M5. 6 Change PRCB. 7 Change DCPU.