Code: 0094
Description: 2nd image transfer pressure / retraction failure
- The 2nd image transfer retraction position sensor is not activated (retracted position) within a given period of time after the retraction sequence of the 2nd transfer roller has been started.
- The 2nd image transfer retraction position sensor is not deactivated (pressed position) within a given period of time after the pressure sequence of the 2nd transfer roller has been started.
- The 2nd image transfer retraction position sensor is not activated (retracted position) within a given period of time after the retraction sequence of the 2nd transfer roller has been started.
- The 2nd image transfer retraction position sensor is not deactivated (pressed position) within a given period of time after the pressure sequence of the 2nd transfer roller has been started.
Causes: 2nd image transfer retraction position sensor (PS10) 2nd image transfer pressure/retraction clutch (CL5) Transport motor (M3) Print control board (PRCB)
Remedy: 1 Check the M3 connector for proper connection and correct as necessary. 2 Check the CL5 connector for proper connection and correct as necessary. 3 Check M3 for proper drive coupling and correct as necessary. 4 Check CL5 for proper drive coupling and correct as necessary. 5 Check the PRCB connector for proper connection and correct as necessary. 6 PS10 sensor check PRCB PJ16-8 (ON) C to D-5 7 CL5 operation check PRCB PJ10-5 (REM) C to D-7 to 8 8 M3 operation check PRCB PJ11-1 to 7 L-4 9 Change M3. 10 Change CL5. 11 Change PRCB.