Code: 0096
Description: 1st image transfer pressure / retraction failure
- The 1st image transfer retraction position sensor is not activated (retracted position) within a given period of time after the intermediate transport motor has started rotating.
- The 1st image transfer retraction position sensor is not deactivated (pressed position) within a given period of time after the intermediate transport motor has started rotating.
- The 1st image transfer retraction position sensor is not activated (retracted position) within a given period of time after the intermediate transport motor has started rotating.
- The 1st image transfer retraction position sensor is not deactivated (pressed position) within a given period of time after the intermediate transport motor has started rotating.
Causes: 1st image transfer retraction position sensor (PS9) 1st image transfer pressure/retraction clutch (CL4) Transport motor (M3) Print control board (PRCB)
Remedy: 1 Check the M3 connector for proper connection and correct as necessary. 2 Check the CL4 connector for proper connection and correct as necessary. 3 Check M3 for proper drive coupling and correct as necessary. 4 Check CL4 for proper drive coupling and correct as necessary. 5 Check the PRCB connector for proper connection and correct as necessary. 6 PS9 sensor check PRCB PJ7-11 (ON) L-6 7 CL4 operation check PRCB PJ19-2 (REM) L-4 to 5 8 M3 operation check PRCB PJ11-1 to 7 L-4 9 Change M3. 10 Change CL4. 11 Change PRCB.