Code: 0300
Description: Polygon motor malfunction
- The polygon motor does not rotate evenly even after the lapse of a given period of time after it has been started.
- The motor lock signal remains HIGH for a given period of consecutive time while the polygon motor is being rotated.
- The polygon motor does not rotate evenly even after the lapse of a given period of time after it has been started.
- The motor lock signal remains HIGH for a given period of consecutive time while the polygon motor is being rotated.
Causes: PH unit Print control board (PRCB)
Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PRCB.