Code: E100
Description: Exposure failure
SOS signal cannot be detected at correct intervals. Output of laser beam does not reach the specified value.
SOS signal cannot be detected at correct intervals. Output of laser beam does not reach the specified value.
Remedy: 1. Remove Left Cover and check the connection and operation of SWITCH I/L ASSY (P/J144, P/J145). 2. The connectors on ROS ASSY are correctly connected? 3. Check the connections between ROS ASSY <=> MCU Board Assy. Disconnection/slant connection of a connector Disconnection/damage of a harness a connector. 4. Because INTERLOCK S/W 5V is not working, 5VDC is not supplied. Check the operation and connection of INTERLOCK S/W 5V (P/J142). 5. Replace ROS ASSY. 6. Replace MCU Board Assy.