Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E300 — Epson AcuLaser M8000N

Code: E300

Description: Fusing failure
Temperature of Heat Roller does not reach the specified value. Warming-up of Fuser Unit is not completed within the specified period. Thermistor detects an abnormally high temperature.
Remedy: 1. Connectors on LVPS are connected correctly? 2. Check the connection between Fuser Unit <=> LVPS <=> MCU Board Assy. Disconnection/slant connection of a connector Disconnection/damage of a harness. 3. Replace Fuser Unit. 4. Replace MCU Board Assy.

← Xem tất cả mã lỗi Epson AcuLaser M8000N

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie