Code: E0003
Description: Fusing ASSY. Problem
Remedy: 1 Thermistor is defective. Does error occur immediately following power-on? • Guideline: Thermistor resistance should be between 200 and 350 KΩ when FUSER ASSY has been left at room temperature (18 to 20°C). Replace the thermistor. 2 Heater lamp is burned out. Confirm that heater lamp comes on when power is switched on with FUSER ASSY in cooleddown state. Replace the heater lamp. 3 Thermal fuse is severed. Check conductance through the thermal fuse at normal temperature Replace the fuse. 4 LVPS ASSY is defective. Confirm that voltage at pin 5 of connector CN210 (on the C232 MAIN board) is 0V at start of warm-up. Replace the LVPS ASSY.