Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E0003 — Epson EPLN1610

Code: E0003

Description: Fusing ASSY. Problem
Remedy: 1 Thermistor is defective. Does error occur immediately following power-on? • Guideline: Thermistor resistance should be between 200 and 350 KΩ when FUSER ASSY has been left at room temperature (18 to 20°C). Replace the thermistor. 2 Heater lamp is burned out. Confirm that heater lamp comes on when power is switched on with FUSER ASSY in cooleddown state. Replace the heater lamp. 3 Thermal fuse is severed. Check conductance through the thermal fuse at normal temperature Replace the fuse. 4 LVPS ASSY is defective. Confirm that voltage at pin 5 of connector CN210 (on the C232 MAIN board) is 0V at start of warm-up. Replace the LVPS ASSY.

← Xem tất cả mã lỗi Epson EPLN1610

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie