Code: 89H
Description: Overhit detection error during cleaning
Causes: An error occurred during cleaning
Remedy: • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Checking the following parts and replacing the defective one: • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board