Code: 00010000
Description: PF Motor Encoder check error
During initial operation at power on or during PF Motor operation, there may be a case where the encoder pulse signal can not be recognized at specified intervals. In such a case, this message is displayed and the printer stops operating.
During initial operation at power on or during PF Motor operation, there may be a case where the encoder pulse signal can not be recognized at specified intervals. In such a case, this message is displayed and the printer stops operating.
Causes: • Disconnected connector for the PF Encoder Sensor. • Disconnected connector for the PF Motor. • Broken wire for the PF Motor Encoder. • Inverted wiring for A and B pulses. • Inverted wiring for the PF Motor. • PF Motor short • PF Motor continuous excitation (voltage applied continuously, motor revolutions unusual) • Broken power supply fuse for the PF motor driver (on the Main Board )
Remedy: