Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 00010006 — Epson Stylus Pro 4400

Code: 00010006

Description: CR Motor over current
During CR Motor operation, there may be a case where an abnormal current out of the specified limits is detected in the CR Motor drive circuit on the C511 MAIN Board or a current exceeding the specified value is required. In such a case, this message is displayed and the printer stops operating.
Causes:
Remedy: 1. Check for dirt, paper dust or damage to the CR Scale. 2. Perform the CR Timing Belt Tension Adjustment 3. Replace the CR_HP Sensor 4. Replace the Motor Assy., CR 5. Replace the C593 MAIN Board

← Xem tất cả mã lỗi Epson Stylus Pro 4400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie