Code: 00010012
Description: CR overload (high sensitivity) error
PWM has been being output for a certain period of time. This can be made when load on the CR Motor is slightly increased.
PWM has been being output for a certain period of time. This can be made when load on the CR Motor is slightly increased.
Causes:
Remedy: 1. Check the load on the CR Motor. • Running load of CR Motor (check by manual operation) • Measure the resistance value of the PF Motor. If the CR Motor is found in short mode, replace the C593 MAIN Board at the same time. • Damage to or wear in the CR Driven Pulley • Damaged or worn bearing of the Carriage Unit • Flaws in the CR Rail caused by roller running • Tension of the CR timing belt 2. Replace the Motor Assy., CR 3. Replace the C593 MAIN Board