Code: 00010013
Description: PR overload (high sensitivity) error
PWM has been being output for a certain period of time. This can be made when load on the PF Motor is slightly increased.
PWM has been being output for a certain period of time. This can be made when load on the PF Motor is slightly increased.
Causes:
Remedy: 1. Check the load on the PF Motor. • Measure the resistance value of the PF Motor. If the PF Motor is found in short mode, replace the C593 MAIN Board at the same time. • Running load of PF Motor (check by manual operation) • Rotation load of PF Motor 2. Replace the Motor Assy., PF 3. Replace the C593 MAIN Board