Code: 00010001
Description: PF Motor out of step
During PF Motor operation, there may be a case where the encoder pulse signal within the specified range is not input within a specified period of time or the pulse width is extremely long or short. In such a case, the PF Motor is judged to be out-of-step, so that this message is displayed and the printer stops operating.B
During PF Motor operation, there may be a case where the encoder pulse signal within the specified range is not input within a specified period of time or the pulse width is extremely long or short. In such a case, the PF Motor is judged to be out-of-step, so that this message is displayed and the printer stops operating.B
Causes:
Remedy: 1. Check for dirt, paper dust or damage to the Loop Scale. 2. Perform the PF Timing Belt Tension Adjustment 3. Replace the PF Encoder Sensor 4. Replace the Motor Assy., PF 5. Replace the C593 MAIN Board