Code: 00010002
Description: PF Motor over current
During PF Motor operation, there may be a case where an abnormal current out of the specified limits is detected in the PF Motor drive circuit on the C511 MAIN Board or a current exceeding the specified value is required. In such a case, this message is displayed and the printer stops operating.
During PF Motor operation, there may be a case where an abnormal current out of the specified limits is detected in the PF Motor drive circuit on the C511 MAIN Board or a current exceeding the specified value is required. In such a case, this message is displayed and the printer stops operating.
Causes:
Remedy: 1. Check for dirt, paper dust or damage to the Loop Scale. 2. Replace the Motor Assy., PF 3. Replace the C593 MAIN Board