Code: 00010006
Description: CR Motor over current
During CR Motor operation, there may be a case where an abnormal current out of the specified limits is detected in the CR Motor drive circuit on the C511 MAIN Board or a current exceeding the specified value is required. In such a case, this message is displayed and the printer stops operating.
During CR Motor operation, there may be a case where an abnormal current out of the specified limits is detected in the CR Motor drive circuit on the C511 MAIN Board or a current exceeding the specified value is required. In such a case, this message is displayed and the printer stops operating.
Causes:
Remedy: 1. Check for dirt, paper dust or damage to the CR Scale. 2. Perform the CR Timing Belt Tension Adjustment 3. Replace the CR_HP Sensor 4. Replace the Motor Assy., CR 5. Replace the C593 MAIN Board