Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 00010012 — Epson Stylus Pro 4800

Code: 00010012

Description: CR overload (high sensitivity) error
PWM has been being output for a certain period of time. This can be made when load on the CR Motor is slightly increased.
Causes:
Remedy: 1. Check the load on the CR Motor. • Running load of CR Motor (check by manual operation) • Measure the resistance value of the PF Motor. If the CR Motor is found in short mode, replace the C593 MAIN Board at the same time. • Damage to or wear in the CR Driven Pulley • Damaged or worn bearing of the Carriage Unit • Flaws in the CR Rail caused by roller running • Tension of the CR timing belt 2. Replace the Motor Assy., CR 3. Replace the C593 MAIN Board

← Xem tất cả mã lỗi Epson Stylus Pro 4800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie