Code: 0001001B
Description: Head driver (TG) temperature error
During printing operation (empty jetting of ink), there may be a case where the temperature inside the Print Head has risen above the specified value and the thermistor in the Print Head detects it as abnormal temperature. In such a case, this message is displayed and the printer stops operating.
During printing operation (empty jetting of ink), there may be a case where the temperature inside the Print Head has risen above the specified value and the thermistor in the Print Head detects it as abnormal temperature. In such a case, this message is displayed and the printer stops operating.
Causes: • Print Heat increase due to empty jetting of ink • Faulty contact of Head FFC, broken Head FFC or disconnected Head FFC. • Print Head broken down.
Remedy: 1. Turn off the power to the printer once and turn it on again and check for recovery. 2. If the same error occurs immediately, replace the Printhead