Code: 0001001E
Description: PF servo parameter error
There may be a case where a voltage exceeding the specified value is about to be applied to the PF Motor. In such a case, this message is displayed and the printer stops operating.
There may be a case where a voltage exceeding the specified value is about to be applied to the PF Motor. In such a case, this message is displayed and the printer stops operating.
Causes:
Remedy: 1. Check for dirt, paper dust or damage to the Loop Scale. 2. Perform the CR Timing Belt Tension Adjustment. 3. Replace the PF Encoder Sensor. 4. Replace the Motor Assy., PF 5. Replace the C593 MAIN Board